Sharpening machine Chucha-LIGHT for KNIVES, 3D model

Greetings! This product is for personal use only. All rights reserved. I am selling a model of a sharpener with a rotary mechanism that can be printed on a 3D printer. You can also purchase files for upgrading on the website. The archive contains 3 folders:

• 3D model BONUS is the source code for the 3D model of the sharpener, with which you can completely edit the model if necessary.
• STL for ABS printing - files are calculated with a shrinkage of 0.3 mm.
• STL for PLA-PETG printing - files are calculated with a shrinkage of 0.2 mm.

If you have other shrinkage parameters, then use the source files from the 3D model BONUS folder, they are in the Autodesk Inventor 2017 format (.ipt-.iam).

What you will need:

1. Smooth shaft for holders of stones with a diameter of 8 mm and a length of 600 mm = 1 piece (on one side you can cut an M8 thread to turn the handle, or you can simply press it in) -

2. A smooth shaft for fastening a frame with a diameter of 8 mm and a length of 180 mm = 1 piece, this shaft is pressed into the frame, so try not to loosen the holes (you need to cut an M8 thread on it with a length of 20 mm, and on the other side 50 mm). We twist the short side into the handle of our frame.

3. M8 pin 235 mm long, which we insert into our rack = 1 pc.

4. M8 pin 35 mm long, which holds our hinge = 1 pc.

5. A smooth shaft with a diameter of 6 mm and a length of 70 mm, into which we press a gear for our rack and pinion mechanism = 1 pc.

6. M6 pin, 50 mm long, for clamping lips = 2 pcs.

7. Hinge with a diameter of 8, for our smooth shaft = 1 piece -

8. Two backlash-free bushings 81130mm, for our shaft that holds the frame -

9. Nut M8 = 4 pcs.

10. Bolt M4x20 = (type DIN 912 hexagon) = 2 pcs for clamping lips.

11. Self-tapping screw 4x25 mm = 4 pcs for rack and pinion mechanism.

12. Bolt M6x35 = 4 pcs. for attaching the rotating mechanism to the frame.

13. Nut M6 = 6 pcs.

14. Spring = 25 mm for shaft with diameter 8 (stone holder) = 2 pcs; We put one at the end as a stopper, and the second for pressing the forms.

15. Spring = 15 mm for tightening the rack and pinion mechanism = 4 pieces, we will put it on our self-tapping screws.

16. Sharpening stones, which can be purchased separately in specialized stores.

17. 3D printer and software for printing the model.

18. Assembly tools such as screwdrivers, wrenches, tweezers, etc.

Please note that assembling the model may require certain skills and knowledge, so if you are not confident in your capabilities, it is recommended that you contact professionals or people who have experience in assembling such devices.

Sharpening machine Chucha-LIGHT for KNIVES, 3D model

The Chucha-LIGHT sharpening machine is an excellent solution for sharpening knives. The model is made in 3D format and allows you to print parts on a 3D printer.

The machine has a rotating mechanism that allows you to sharpen knives at any angle. Sharpening stones can be purchased separately in specialized stores.

Assembly of the model does not require special skills and knowledge; all necessary parts and instructions are included in the kit. The Chucha-LIGHT sharpening machine is a reliable and durable device that will last a long time.

style="background-color:#333333; color:#ffffff; padding:15px 30px; border-radius:5px; text-decoration:none;">Buy now

The Chucha-LIGHT sharpening machine for knives is a model that is designed for sharpening knives. It is made in 3D format and can be printed on a 3D printer. The machine is equipped with a rotating mechanism that allows you to sharpen knives at any angle. The kit also includes files for upgrading.

The archive contains 3 folders: 3D model BONUS - sources of the 3D model of the sharpener, which can be edited if necessary, STL for ABS printing - files calculated with a shrinkage of 0.3 mm, and STL for printing PLA-PETG - files calculated with a shrinkage of 0.2 mm . If you have other shrinkage parameters, then you should use the source files from the 3D model BONUS folder, they are in the Autodesk Inventor 2017 format (.ipt-.iam).

To assemble the machine you will need a smooth shaft for holding stones with a diameter of 8 mm and a length of 600 mm, a smooth shaft for fastening a frame with a diameter of 8 mm and a length of 180 mm, an M8 pin 235 mm long, an M8 pin 35 mm long, a smooth shaft with a diameter of 6 mm and a length of 70 mm, a pin M6 50 mm long, hinge diameter 8, backlash-free bushings 81130 mm, M8 and M6 nuts, M4x20 bolts, 4x25 mm self-tapping screws, M6x35 bolts and springs. You will also need a 3D printer and software to print the model.

Please note that assembling the machine requires certain skills and knowledge, so if you are not confident in your capabilities, it is recommended that you turn to professionals or people who have experience in assembling such devices. Sharpening stones can be purchased separately in specialized stores.

***

The Chucha-LIGHT sharpening machine for knives is a 3D model that can be printed on a 3D printer. The machine has a rotating mechanism and can be upgraded if necessary. The archive with the model has three folders: BONUS, STL for ABS printing and STL for PLA-PETG printing. If you have other shrinkage parameters, you can use the source files from the BONUS folder.

To create a sharpening machine, you will need the following parts: a smooth shaft with a diameter of 8 mm and a length of 600 mm for the stone holders, a smooth shaft with a diameter of 8 mm and a length of 180 mm for fastening the frame, an M8 pin 235 mm long for the rack, an M8 pin 35 mm long for holding hinge, a smooth shaft with a diameter of 6 mm and a length of 70 mm for a rack and pinion mechanism, an M6 pin 50 mm long for clamping lips, a hinge with a diameter of 8 mm for a smooth shaft, two backlash-free bushings 81130 mm for the shaft that holds the frame, M8 nuts (4 pieces), M4x20 bolts (2 pieces) for the clamping lips, 4x25 mm screws (4 pieces) for the rack and pinion mechanism, M6x35 bolts (4 pieces) for attaching the rotary mechanism to the frame, M6 nuts (6 pieces), a 25 mm long spring for a shaft with a diameter of 8 mm (stone holder), a 15 mm long spring for pressing the rack and pinion mechanism (4 pieces) and a central spring with an internal diameter of 12 mm or more and a length of 60 mm.

It is recommended to use simple and cheap flesh-colored ABS plastic from Plexiwire, the wall thickness should be between 1.8 and 2.6 mm depending on the situation. The percentage of parts filled also depends on their type and can be from 25% to 100%.

***

1. Excellent sharpening machine! After sharpening, the knives cut like new.
2. The modern 3D model of the Chucha-LIGHT sharpening machine ensures high sharpening accuracy.
3. Sharpening knives quickly and easily has become a reality thanks to Chucha-LIGHT.
4. Worth the money - sharpens quickly and efficiently!
5. An excellent purchase for any cook who appreciates the sharpness of knives.
6. Finally, my knives began to cut as they should, thanks to Chucha-LIGHT!
7. Ease of use is the main advantage of this sharpening machine.
8. I definitely recommend Chucha-LIGHT to anyone looking for a quality sharpening machine.
9. After using this machine, the knives began to cut so well that I did not even expect such a result.
10. The Chucha-LIGHT model is a necessary tool for any chef and cooking enthusiast.

Peculiarities:

With the Chucha-LIGHT grinding machine, knives began to shave with a bang!

Very handy and easy to use 3D model of the grinder.

The Chucha-LIGHT machine is a real savior for those who appreciate their knives.

The machine works quickly and efficiently, the knives become sharp after the first use.

I finally found a grinder that doesn't ruin the blade of a knife, but makes it really sharp.

The Chucha-LIGHT machine is easy to use and compact in storage.

I am very pleased with the purchase - the Chucha-LIGHT sharpening machine has greatly simplified my knife sharpening process.

The Chucha-LIGHT machine is a real must-have for any cook or hunter.

The machine quickly allowed me to restore the sharpness of long-dull knives.

I recommend the Chucha-LIGHT grinder to anyone who wants to have sharp knives without any extra effort.