A complete dump of the CB2_V8 H3 WhatsMiner control board is provided, which can be used to program a soldered flash memory chip through a programmer, for example, such as ChipProg48 and similar. This archive contains a dump read from the working TC58BVG1S3HTA00 chip. However, if you do not have a programmer and an adapter socket for such flash memory, then purchasing this dump does not make sense. Please remember that this is not firmware! In case of failure, claims will not be accepted, so any actions are carried out at your own peril and risk.
This product is a complete dump of the CB2_V8 H3 WhatsMiner control board, which can be used to program a soldered flash memory chip through a programmer, for example, such as ChipProg48 and similar. The archive contains a dump taken from the working TC58BVG1S3HTA00 chip, which guarantees its high quality.
Purchasing this digital product will allow you to program the flash memory chip and ensure safety and reliability in operation. However, it should be remembered that to use this product you need a programmer and an adapter socket for this flash memory.
Please note that this product is not firmware! If unfortunate situations arise, we do not accept claims, so all actions are carried out at your own peril and risk.
Offered for sale is a complete dump of the CB2_V8 H3 WhatsMiner control board, which can be used to program a soldered flash memory chip through a programmer, for example, such as ChipProg48 and similar. This dump was read from a working chip TC58BVG1S3HTA00 and therefore provides high quality. By purchasing this product, you will be able to program the flash memory chip and ensure safety and reliability in operation. However, it should be noted that to use this product you need a programmer and an adapter socket for this flash memory. It is important to understand that this product is not firmware and in case of failure, claims will not be accepted, so all actions are carried out at your own peril and risk.
***
This product is a complete dump of the CB2_V8 H3 control board for the WhatsMiner device. It is used to program a soldered flash memory chip using a programmer like ChipProg48 or similar devices. The dump archive contains information read from the working TC58BVG1S3HTA00 chip.
It is important to consider that if you do not have a programmer and adapter panel for such flash memory, then this dump may be useless for you. It is also necessary to understand that this product is not firmware, but is only intended for flashing flash memory chips.
If the firmware attempt is unsuccessful, the seller is not responsible and claims will not be accepted. By purchasing this product, you agree to use it at your own risk.
***